Filter
Top Products
1.0 WARRANTY INFORMATION
Patton Electronics warrants all Model 460RC components to be
free from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment. This
warranty is limited to defects in workmanship or materials, and does not
cover customer damage, abuse or unauthorized modification. If this
product fails or does not perform as warranted, your sole recourse shall
be repair or replacement as described above. Under no condition shall
Patton Electronics be liable for any damages incurred by the use of
this product. These damages include, but are not limited to, the
following: lost profits, lost savings and incidental or consequential
damages arising from the use of or inability to use this product. Patton
Electronics specifically disclaims all other warranties, expressed or
implied, and the installation or use of this product shall be deemed an
acceptance of these terms by the user.
1.1 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates that
it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the Union European
(EU). A Certificate of Compliance is available by contacting Patton
Technical Support.
1.2 SERVICE AND SUPPORT
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Service at (301) 975-1007; http://www.patton.com: or,
support@patton.com.
NOTE: Packages received without an RMA number will not be
accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 460RC. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
1 2
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. If any questions or problems
arise during installation or use of this product, please do not hesitate to
contact Patton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
• Connects 75 Ohm Dual Coax to 120 Ohm Twisted Pair
• Bi-Directional Signal Conversion According to CCITT G.703
• Data Rates up to 2.048 Mbps
• Low Profile Design
• Mounts in Standard 19” (48.3 cm) Rack
• No AC Power or Batteries Required
• Male or Female Coax BNC Connectors Available
• Strap Selectable Modular (RJ-45) Pinouts
2.2 DESCRIPTION
The Patton 460R Series G.703 balun panels match multiple sets of
dual 75 ohm coax connections to multiple 120 ohm twisted pair
connections. This function allows carriers to provide 120 ohm G.703
service to customers retaining 75 ohm CPE hardware. It also allows
carriers who have standardized on 75 ohm coax to provide 120 ohm
terminations to their customers (in keeping with European ONP
requirements).
Supporting E1 data rates to 2.048 Mbps, the Patton 460-R Series
panels bi-directionally match, not only signal impedance, but also the
pulse shapes of the signals according to the CCITT G.703 standard.
The Patton 460-R Series G.703 balun panels mount in a standard 19”
(48.3 cm) rack, and are available with either 1 to 16 modules per rack.