Panasonic RX-ES27 Portable CD Player User Manual


 
34
RQT6279
The Play and Record Timer
You can set the timer to come on at a certain time to wake you up
(play timer) or to record a radio station (record timer).
Preparations:
Turn the unit on and set the clock. (\ page 12)
For play timer, prepare the music source (tape/CD/radio) for
listening, and set the volume.
For record timer, check the cassette’s erasure prevention tab
(
\
page 26:
A ) and load the cassette with the side for recording facing
up. Tune to the radio station (\ page 14 or 16), and set the volume.
Setting the start and finish times
1
Press [CLOCK/TIMER] to select the desired timer
function.
Each time you press the button:
ON
˚˚
˚˚
˚ PLAY: to set the play timer
ON
˚˚
˚˚
˚ REC: to set the record timer
Proceed to step
2 before these indicators stop flashing
(about 10 seconds).
2
Turn [TIME/PRESET TUNE CD SKIP ] to set
the start time.
Press [CLOCK/TIMER].
3
Turn [TIME/PRESET TUNE CD SKIP ] to set
the finish time.
Press [CLOCK/TIMER].
The start and finish times are now set.
Turning the timer on
4
Press [˚PLAY/REC] to display the timer indicator.
Each time you press the button:
˚˚
˚˚
˚ PLAY: to turn the play timer on
˚˚
˚˚
˚ REC: to turn the record timer on
(The indicator doesn’t appear if the start and finish times
haven’t been set.)
“E” appears if the clock hasn’t been set.
5
Press [
/I
] to turn the unit off.
The unit must be off for timer to operate.
The record timer comes on about 30 seconds earlier than the
set time.
To cancel the timer
Press [
˚˚
˚˚
˚ PLAY/REC] when the unit is on to clear the timer indica-
tors from the display.
(The timer comes on at the set time everyday if the timer is on.)
PLAY
no display (off)
REC
CLOCK
ON
œPLAY œPLAY OFF
Original display
ON
œRECœREC OFF
7
1
Start

FOR PLAY TIMER FOR RECORD TIMER
7
2
7
3
1
2
1
2
7
4
7
5
Finish

7
2
7
3
7
4
7
5
7
1
7
2
7
3
1 1
2 2
¡UN²½≈
¡bÐ
Start

Finish

¡UN²½≈
¡bÐ
RQT6279-G (30-35)2 7/12/01, 4:49 PM34