Filter
Top Products
Before use
12
RQT6118
Connecting an SD Memory Card
Connect the included USB Reader/Writer to checkout (record) tracks to your
SD Memory Card.
Turn on the computer and start Windows.
Connect the USB Reader/Writer
to the computer's USB port.
The "New Hardware Found" screen appears.
The driver for the USB Reader/Writer is enabled
automatically.
Check that it appears in Windows Explorer as a removable drive.
Taking care that the card is
facing the right way, insert the
SD Memory Card into the USB
Reader/Writer.
Insert label-up
with the cut-off
corner facing in
ACCESS lamp
To the
computer's
USB port
· Connect to an AC power supply when using a portable computer. Data can be lost or
errors can occur if the computer turns off during operation.
· Operation cannot be guaranteed under the following circumstances:
*When you have connected two or more USB Reader/Writer to your computer or are
using another USB device.
*When you have connected another SD Memory Card adapter.
*When you are using a USB hub or extension cord.
You can damage the card and USB Reader/Writer's slot if you insert the card
incorrectly.
Ensure the USB Reader/Writer's ACCESS lamp is off before inserting or ejecting
SD Memory Cards.
Do not remove the SD Memory Card while checking out even if
the ACCESS lamp is off.
Note
Note