Panasonic RC-CD300 Clock Radio User Manual


 
6
CD
Press [
1/ ;, CD] to start play.
Press [i, 5/9] or [j, :/6] to select the desired
track.
Press and hold [AL 1/-SET]
until the display flashes.
Press [i, 5/9] or [j, :/6]
to adjust the alarm time.
2 [i, 5/9]: Increases the time
by one-minute units.
2 [j, :/6]: Decreases the time
by one-minute units.
The time changes faster if you hold [i, 5/9] or [j, :/6]
down.
Press [
AL 1/-SET
].
The alarm time is set and “AL 1” is
indicated on the display .
Press [
, OFF
] to turn off.
RADIO
Tune to the station.
(Refer to page 5 “Listening to the radio” )
Press and hold [AL 1/-SET]
until the display flashes.
Press [i, 5/9] or [j, :/6]
to adjust the alarm time.
Press [
AL 1/-SET
].
The alarm time is set and “AL 1” is
indicated on the display .
Press [
, OFF
] to turn off.
For your reference:
The unit can be used after the CD/Radio alarm has been set. Be sure the
volume is at an appropriate level before you turn the unit off.
If you set the CD alarm but do not insert a CD or set the radio alarm but
do not receive a station, the buzzer will sound at the set time instead.
Note
Using the alarm
You can set the unit to come on at a set time and play a CD, the radio or a buzzer. The unit turns off automatically after one hour.
Preparation: Set the current time. (Refer to page 3 “Setting the time”)
Setting the CD/Radio alarm (ALARM 1)
SLEEPDISP /
-
TIME SET AL 1 /
-
SET AL 2 /
-
SET MODE
OFF RADIO
FM/AM
CD
FM
88 92 96100104 108
MHz
53 60 70 80 100 130 170
kHz
X10
AM
RC
-
CD300
CD CLOCK RADIO