Filter
Top Products
For your reference:
“ ” indication
This indication appears for about 30 seconds if
[
1
;
] is pressed when no disc is loaded in the unit or if
the disc is not completely seated.
“*” indication
This indication appears for about 10 minutes when the
cover is opened. (However, the indication does not ap-
pear when the unit is powered off.)
Removing discs
1 Press [∫, POWER OFF] to stop play
and discs rotation.
2 Slide [OPEN] to open the lid.
3 Press [PUSH] to release the disc.
Do not stop the disc by hand or try to remove it before it
stops rotating. This can damage CDs.
Note!
Never insert foreign objects into the unit body.
3
Listening to CDs
Basic Play
Auto power off function
If the unit is left in stop or paused status for approxi-
mately 10 minutes, the unit powers itself off auto-
matically in order to prevent the batteries from
running down.
(If no disc is loaded in the unit it powers itself off in
30 seconds.)
RESUME RANDOM
NORMAL
HOLD
1
5
6
23
4
VOLUME
5
4
6
L
R
HOLD
1;
S
E
C
O
N
D
S
POWER
OFF
∫
TUNING
9
:
P
U
S
H
P
U
S
H
Total number of tracks
Total playing time
Elapsed playing time of each track
Track number in play
Label must face
upward.
Close the lid.
1 Slide [OPEN] to open the lid, and in-
sert the disc.
2 Release hold.
3 Set the play mode selector to
[NORMAL].
4 Connect the wired remote control
and the stereo earphones to [Ë].
(Plug in firmly.)
5 Press [
1
;
] (main unit) or press the
play/stop/off button (remote control)
to start play.
(Play stops automatically when all the tracks have
been played.)
6 Adjust the volume.
If the unit has been connected to the car audio
system, adjust the volume level between 4 and 6
on the unit, then adjust the volume level on the
system.
∫ To pause play (Available only from the main unit)
Press during play.
(Press again to restart play.)
∫ To stop play
Press during play.
∫ To turn off the unit
Press during stop mode (main unit) or press and hold
during play or stop mode (remote control).
∫ Skip / Search function
Skip function : Press during play.
Search function :Press and hold during play.
≥During program play (page 4), these buttons are used
to skip forward or back through the programmed se-
quence of tracks.
≥During random play (page 4), the skip buttons cannot
be used to skip back to tracks that were played previ-
ously in the random sequence.
≥During program play, random play or 1-track repeat
play (page 4), search operation is limited to the current
track only.
1;
Off mode
POWER
OFF
∫
Stop mode
Play/stop/off button
(Beep)
POWER
OFF
∫
(Beep...Beep)
(Beep...Bee..p)
TUNING
9
:
Forward Forward
Backward Backward
(Beep Beep Beep)
(Beep Beep)
Operation confirmation tones of the
remote control
When an operation button is pressed, a confirma-
tion tone sounds. Refer to the parentheses in the il-
lustration for the different types of confirmation
tones.
Main unit Remote control
Main unit Remote control
Main unit Remote control
Plug type:
3.5 mm stereo