Panasonic D11 MP3 Player User Manual


 
7
RQT5210
Listening
3
2
4
5
7
6
1
1 3 5 2 4 67
Preset channel
Presetting radio broadcasts
Up to twelve FM and AM stations each can be programmed.
If broadcast frequencies are preset in the memory, you can easily
tune in any of these frequencies.
You can preset just those stations you like.
1
Set [ ] to “TUNER”.
2
Press [BAND] to select “FM” or “AM”.
Every time you press the button: FM AM
3
Press [MEMORY].
” and the frequency flash.
4
While “ ” and the frequency are flashing:
Press [–/g] or [f/
+] to select the desired
station.
” lights when an FM stereo program is being received.
Reference
You can select the desired broadcast by using “Automatic
tuning”. (See page 9.)
5
Press [MEMORY].
” and the preset channel number flash.
6
While “ ” and the preset channel number are
flashing:
Press [–/g] or [f/+] to select the preset channel.
7
Press [MEMORY].
If the “ ” indicator goes off during programming, return to
step 3.
Repeat steps 3 to 7 to program other stations.
RX-D11 only
When using the remote control
Preparation: Set [ ] to “TUNER”.
1. Press [BAND] to select “FM” or “AM”.
2. Press [MEMORY/PGM].
3. While “ ” and the frequency are flashing:
Press [–/g] or [f/+] to select the desired station.
4. Press [MEMORY/PGM].
5. While “ ” and the preset channel number are flashing:
Press [3] or [4] to select the preset channel.
6. Press [MEMORY/PGM].
Repeat steps 2 to 6 to program other stations.