Filter
Top Products
E-9
For better performance (continued)
Never clean the unit with solvents such as benzene, thinner, or alcohol
• Before cleaning, remove the battery pack or unplug the AC adapter.
• Cleaning the unit with solvents may damage the outer case or cause the paint to peel.
• Use a clean, soft dry cloth to wipe away dust or dirt. If the unit becomes quite dirty, wipe it with
a cloth dampened in diluted neutral detergent after wringing the cloth well. Use a dry cloth to
wipe it dry.
• If you use a chemically treated dust cloth, follow the precautions for use.
Use the optional AC adapter (AG-B15).
Read the user’s manuals of all accessories carefully
before use.
Note:
When using an AC adapter, attach the included ferrite core
near the base of the battery-type connector on the DC cable
connected to the unit. Be sure to wind the cable around the
ferrite core twice, as shown, at time of attachment.
If you do not use the ferrite core, other devices may be
affected by the unit.
AC adapter
Cleaning
The unit’s internal hard disk drive (HDD) is a high-performance part that is subject to
maintenance.
To keep the unit in optimal condition, we recommend that you inspect it regularly and bring it to
the place of purchase for periodic maintenance.
Ask your dealer for further details about periodic maintenance.
Request periodic maintenance under this guideline. See page E-22 for instructions on checking
the operating time.
Tips:
• In some cases, the content of the HDD is cleared during maintenance, so any data will be lost.
Before maintenance, always back up needed data on separate storage media.
Please understand that you will not be compensated for lost data.
• You will not be compensated for data stored on the HDD in the case of HDD failure. Lost data cannot be
recovered.
The HDD is for temporary storage of data, and we recommend backing up needed data promptly.
Every 2,000 hours of use
Maintenance
Use the optional Battery pack.
Read the user's manuals of all accessories carefully before use.
Battery pack
Battery-type connector
on the DC cable
Ferrite core
Wind twice
around and
close it