Filter
Top Products
EN
14
BUTTON HOLD
The button hold function locks your player to prevent any buttons from
being pressed. The indicator will show when the buttons are locked.
1. Slide the HOLD switch on to activate.
2. To unlock the buttons, slide the HOLD switch off. disappears
from the screen.
RESET
Occasionally the MP3 player may not function properly and will need
to be reset. When the power is on, press and hold RESET using a
blunt narrow-tip stylus or ballpoint pen until the power turns off. Turn
the power on to begin operation again.
UPGRADING FIRMWARE (WINDOWS USERS ONLY)
Upgrading your MP210 MP3 player with the latest firmware ensures
the device provides optimal playback performance:
1. Go to the Oregon Scientific website (www.oregonscientific.com) to
download the MP210 firmware update (.zip file).
2. Unzip the file into the directory recommended by Windows and
install the software by double-clicking "setup.exe".
NOTE: If this is not the first time you are performing a firmware
upgrade, please uninstall the old version before installing the new
firmware update.
NOTE: The firmware upgrade and formatting of the player through
the Macintosh computer is not supported.
3. After the firmware has been installed, restart your computer.
4. After the PC has finished booting up, connect your MP3 player
to the PC via the USB cable.
5. Run the software by going to
Start>Programs>Oregon
Scientific MP210>Firmware
Upgrade.
MP210 Eng R4 op 7/22/04, 11:17 PM14