Filter
Top Products
16
RANDOM PLAY
In random play, the CD player plays
all the tracks once in random order,
then automatically stops. To start ran-
dom play at any time, repeatedly
press
PLAY MODE
until
RANDOM
ap-
pears.
Note:
If you select random play during
programmed play, the CD player
stops the programmed sequence and
starts random play of all tracks.
To cancel random play, press
PLAY
MODE
so
RANDOM
disappears.
PROGRAMMED PLAY
You can program up to 24 tracks on a
CD to play in any order you choose,
and you can program the same track
to play more than once.
Follow these steps to program and
play a sequence.
1. Press
PLAY/PAUSE
to start
the CD player, then press
STOP/
CLEAR
.
2. Hold down
MEMORY/E-BASS
until
the selection number (
01
) and the
track number (
00
) appear as
PGM
flashes.
3. Repeatedly press either or
to display the number of the
first track you want to program.
4. Press
MEMORY/E-BASS
to store
the selected track number. The
selection number advances by
one and the track number on the
display returns to
00
.
5. Repeat Steps 3 and 4 for each
track you want to program, up to
24 tracks.
Note:
When you store the 24th
track in memory,
FuLL
appears.
6. To play the programmed se-
quence, press
PLAY/PAUSE
.
PGM
appears and the first track in
the sequence plays.
While the programmed sequence
plays, you can use or
to move forward or backward in
the sequence.
7. After the last programmed track
ends, the CD player stops. To
manually stop the CD before the
end of the sequence, press
STOP/
CLEAR
.
• To replay the programmed se-
quence, press
PLAY/PAUSE
within 2 minutes.
• To check the programmed se-
quence, press
MEMORY/E-
BASS
within 2 minutes. The dis-
play shows the number of the
first programmed track. Each
time you press
MEMORY/E-
BASS
, the display shows the
number of the next track in the
sequence.
42-5073.fm Page 16 Thursday, August 12, 1999 11:08 AM