Filter
Top Products
23
Note: As you press
P MODE
,
appears on the display with
and without . You can
program the CD player in either
mode.
2. Repeatedly press either or
to display the number of
the first track you want to pro-
gram.
3. Press
M-SET/REMAIN
to store
the selected track number. The
selection number advances by
one and the track number on
the display returns to
00.
4. Repeat Steps 2 and 3 for each
track you want to program, up to
22 tracks.
Note: The CD player automati-
cally begins to play if you pro-
gram 22 tracks.
5. To play the programmed
sequence, press .
appears steadily and the first
track in the sequence plays.
While you play the programmed
sequence, you can use to
move forward or to move
backward in the sequence.
6. After the last programmed track
ends, the CD player stops.
At the end of programmed play,
disappears from the display, but the
programmed sequence is still in the
player’s memory.
Notes:
• To return to normal play from
programmed play, repeatedly
press
P MODE
until disap-
pears from the display.
• To replay the programmed
sequence, repeatedly press
P
MODE
until appears on the
display. Then press
within 10 seconds to play the
sequence.
42-5069.fm Page 23 Thursday, August 12, 1999 10:28 AM