Filter
Top Products
12
USING AC POWER
You can power the CD player from
standard AC power using an AC
adapter, such as Cat. No. 273-1664
(not supplied).
Cautions:
• You must use an AC adapter
that supplies 6 volts and deliv-
ers at least 550 milliamps. Its
center tip must be set to posi-
tive, and its plug must correctly
fit the CD player’s
EXT DC 6V
jack. The recommended AC
adapter meets these specifica-
tions. Using an adapter that
does not meet these specifica-
tions could damage the CD
player or the adapter.
• When you finish using the AC
adapter, disconnect it from the
AC outlet first, then unplug it
from the CD player.
Follow these steps to use an AC
adapter.
1. Attach the 4.0 mm outer diame-
ter/1.7 mm inner diameter barrel
plug to the adapter cord, match-
ing positive (+) on the plug with
TIP on the cord.
2. Set the adapter’s voltage switch
to 6V.
3. Insert the adapter’s barrel plug
into the CD player’s
EXT DC 6V
jack.
Note:
Battery power discon-
nects when you connect an AC
adapter to the CD player
(unless you are using a special-
order nickel-cadmium battery
pack).
4. Plug the other end of the
adapter into a standard AC out-
let.
EXT DC 6V
42-5069.fm Page 12 Thursday, August 12, 1999 10:28 AM