Filter
Top Products
20
1
EN
Inserting and ejecting a microSD card
Inserting and ejecting a microSD card
Notes
• It is possible to switch the recording
media over to the built-in memory
(☞ P.47, P.57 ).
• In some cases microSD card which have
been formatted (initialized) by another
device, such as a computer, cannot be
recognized. Be sure to format them with
this recorder before using (☞ P.63).
Ejecting a microSD card
1 While the recorder is during stop
mode, open the card cover.
2 Push the microSD card inward to
unlock it, and let it eject partially.
• The microSD card is visibly out of the
slot and can be removed safely.
• If you eject the microSD card when
the memory is selected to [microSD
Card], it will automatically changed
to [Built-in Memory Selected].
3 Close the card cover securely.
Notes
• Releasing your nger quickly after
pushing the microSD card inward may
cause it to eject forcefully out of the slot.
• Before inserting the microSD card, turn
o the write protection function. Check
the Olympus website regarding microSD
cards which are con rmed operation with
this recorder.
• This recorder may not recognize correctly
on some microSD cards which are not
compatible with this recorder.
• In the case when the microSD card cannot
be recognized, remove the microSD card
then put it in again to see if this recorder
recognizes the microSD card.
• The processing performance reduces in
a microSD card when you repeat writing
and delete. In this case, format the
microSD card (☞ P.63).