Filter
Top Products
14
Installation Steps
Follow the steps below to install the battery.
1. Pull the battery holder out from the remote control in the direction of the arrow.
2. Load a new battery properly with the (+) side up.
3. Insert the battery holder back into the remote control.
Use of Remote Control
Point the remote control unit from no more than about 5m from the remote control sensor
and within about 60 degrees of the front of the unit.
Note
¾ The battery will last for about 1 year under normal use (at room temperature).
¾ Improper use of the battery may cause overheating, explosion or ignition, which can
result in an injury or a fire. Battery leakage may damage the remote control.
¾ Do not expose the remote control unit to direct sunlight.
¾ Do not recharge, disassemble, deform or heat the battery.
¾ Do not put the battery in fire or water.
¾ Immediately replace the exhausted battery.
¾ Take out battery when the remote is not in use for a long time.
Preparation and Using
of Remote Control