Filter
Top Products
PITCH CONTROL
Repeatedly press the ( ) or ( ) buttons to decrease or increase
the replay speed in twenty steps of 0.1rpm respectively.
- slower + faster
5
SWITCHING ON AND OFF
Pressing the power switch on your music hall turntable alternately starts or stops
the motor.
78 RPM REPLAY
In order to replay records at 78 rpm your turntable must be equipped with the
appropriate 78 rpm pulley. This pulley is available as an optional accessory. After
fitting the 78 rpm pulley proceed as follows: Remove the platter and fit the belt
around the larger step of the pulley. Replace the platter, start the turntable at
33.3 and switch the speed to 45 rpm, the platter will revolve at 78 rpm.
TECHNICAL SPECS
Nominal speeds .............................................. 33 and 45 rpm. (optional 78 rpm)
Quartz oscillator ........................................................... Speed stability 0.0001%
Pitch control ............................................................................. 20 step/0.1 rpm
Turntable connection ............................... 16V/AC (3W power consumption max.)
120V/AC (3W power consumption max.)
Outboard power supply ............................................................ 16V/1.000mA AC
Dimensions (WxHxD)........................................................... 4.2" x 5.8" x 2.0"
Weight ....................................................................................... 1.43 lbs. Pkgd.