Filter
Top Products
3
GETTING STARTED
Thank you for purchasing the Music Hall cruise control 2.0 electronic speed control.
This manual provides valuable information that will help you get optimum
performance from your system. Please contact your authorized Music Hall dealer
for any additional clarifications you may require.
Shipping or moving the cruise
control 2.0 in anything other than the original packing material may result in
severe damage that is not covered by the warranty. Be sure to keep the original
sales receipt; it is your best record of the date of purchase, which you will need in
the event warranty service is required.
Save the shipping carton and
all enclosed packing material for future use.
INTRODUCTION
This unit permits the electronic speed control of music hall and project turntables
between 33.3 and 45 rpm and also permits the replay of records by allowing 78
rpm with the appropriate pulley and cartridge. The replay speed can be increased
and decreased in twenty steps of 0.1 rpm.
The cruise control 2.0 will provide speed control for all music hall turntables and
many project models. Please consult your dealer for a full list.
CONNECTING THE RECORD PLAYER 16V motor (turntable
is currently powered by an existing wall wart style power
supply)
Disconnect and remove your existing wall wart power supply from your turntable.
The original power supply is then no longer required.
R
designed and developed in the USA
OUTPUT
~ 120V~ 120V
3W
OUTPUT
~16V~ 16V
3W
INPUT
~16V~ 16V
1A