Filter
Top Products
7
Setting the alarm to wake to CD
1 Push the CD OPEN button down and place a CD into the compartment.
Ensure the CD is pressed firmly into position then close the door correctly.
2 Set the required alarm time as per setting alarm procedure.
3 Switch the function selector switch (19) to CD.
4 Slide the ALARM selector switch (22) or (16) to the MUSIC position.
(ALARM indicator (32) or (8) will illuminate).
5 Using the wake up track system below you may set the CD track of your
choice.
At the wake up time, the CD will play until the end of the disc unless the
REPEAT function is activated, then it will play continuously for approximately 2
hours.
6 Press the STOP button (9) or the power Off button (30) if you wish to
stop the CD playing at any time.
If you fail to insert a CD into the CD player the alarm will automatically default
to the buzzer alarm.
To wake up to your favourite cd track
The unit may be set to play any preselected CD track of your choice.
1 Press and hold the wake up track set button (23) and simultaneously hold
down the SKIP SEARCH FOWARD button (12) to select the track number.
The display will indicate the selected track.
2 Press and hold the wake up track set button (23) and simultaneously hold
down the SKIP SEARCH REVERSE button (13) will adjust the tracks in
the reverse direction.
It is only possible to set the same track for both alarm settings.