Filter
Top Products
Switching on, and setting the clock time
Before any alarm functions can be used on your CD alarm clock radio you must
first set the clock to the correct time.
1 Place the unit on a flat surface. Plug the mains plug into the wall socket
and switch on the wall socket.
2 The LED clock display (1) will flash.
3 Press and hold the TIME SET button (21) and simultaneously hold down
the SKIP SEARCH FORWARD button (12). The LED clock display (1)
will advance the minutes and hour segments. Release all buttons when the
correct time is set.
4 Press and hold the TIME SET button (21) and simultaneously hold down
the SKIP SEARCH REVERSE button (13) will adjust the clock time in the
reverse direction.
5 The PM indicator (33) will illuminate to indicate 12.00 midday has been
reached.
Power On/Off
The unit must be switched on before the radio or CD functions can operate.
1 Switch the unit on by pressing the power ON button (29).
2 Switch the unit off by pressing the power OFF button (30).
Setting the clock alarm time
The alarm function can be set to operate on the following functions:
wake to radio, wake to buzzer alarm or wake to any CD programmed track.
1 Press and hold the ALARM 1 SET button (26) and simultaneously hold
down the SKIP SEARCH FORWARD button (12). The clock display (1) will
advance the minutes and hour segments. Release all buttons when the
correct alarm time is reached.
2 Press and hold the ALARM 1 SET button (26) and simultaneously hold
down the SKIP SEARCH REVERSE button (13) alarm time will adjust in the
reverse direction.
To set alarm 2 follow the above procedure using the ALARM 2 set button.
5