Filter
Top Products
3
Double insulated tools can use RQO\D
three wire extension cord. As the distance from the
supply outlet increases, you must use a heavier
gauge extension cord. Using extension cords with
inadequately sized wire causes a serious drop in
voltage, resulting in loss of power and possible tool
damage. Refer to the table shown to determine the
required minimum wire size.
When using more than one extension
cord to make up the total length, be sure each cord
contains at least the minimum wire size required.
If you are using one extension cord for more than
one tool, add the nameplate amperes and use the
sum to determine the required minimum wire size.
eXTension
cords
SPECIFICATIONS
Cat. No. AC Volts AC Amps
1
220-240V
C12-28 DCR
The lightning ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous volt-
age" within the product's enclosure that may be of
sufcient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICABLE PARTS INSIDE. REFER SERVICI-
ING TO QUALIFIED SERVICE PERSONNEL.
RISKOFELECTRICSHOCK
DO NOT OPEN
CAUTION
SYMBOLOGY
To reduce the risk of injury, user
must read operator’s manual.
Volts
Alternating Current
A
Amps
Hertz
&ODVV,,(TXLSPHQW
Presence of important operating
instructions.
Caution. Risk of electric shock.
Regulatory Compliance Mark
(RCM). Product meets applicable
regulatory requirements.
Direct Current
'RXEOH,QVXODWHG