Filter
Top Products
28
DVD OPERATION
Press the STANDBY button on the remote
to turn on the unit; the POWER indicator will
light.
NOTE:
You can also press and hold the POWER
ON/PLAY/PAUSE (
®p) button on the main
unit for two seconds to turn on the unit.
1
2
1
Press the Disc Door OPEN button to open
the disc tray, “OPEN” will appear on the
screen. Insert a disc with the label side
facing up on the disc tray.
1
2
2
PLAYBACK OF A DVD
IMPORTANT NOTES:
• After plugging in, the unit will be in the Power Off mode. Press and hold the Power
ON/Play/Pause (
®p) button on the main unit for two seconds to turn on the unit; the
Power indicator will light.
• “ ” will appear on the TV screen during operation if you try to access a function that
is not available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will
appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc,
position it with the printed title side facing up, align it with the guides and place it in its
proper position.
• It is important that you read the manual that accompanies the DVD disc as there are
features that are on this DVD player that cannot be used with certain DVDs. There are
also extra features that are different for each DVD disc, so they are not explained in this
owner’s manual.
• If the units is in the Stop mode or if there is no disc in the disc tray, the unit will power off
automatically after seven minutes.
CONTINUED ON THE NEXT PAGE