Filter
Top Products
13
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A TV USING THE S-VIDEO CABLE (INCLUDED)
NOTES FOR CONNECTING TO A TV:
• If your TV has an S-Video input, connect the DVD player with the S-Video cable
for best results.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the DVD, refer to the owner’s manual of the TV, as well as
this manual.
• When connecting the DVD to the TV, make sure the power is off and both units are
unplugged before making any connections.
• Connect the DVD player to your TV directly. If you connect the DVD player
through a VCR, the playback picture will be distorted because DVD video discs
are copy protected.
• When using the S-VIDEO output, you should set the Component output to TV in
the VIDEO SETUP menu. Otherwise, the picture on the TV screen will keep
rolling. See page 22 to set the Component Output to TV.
• When the Component output is set to TV, the main unit’s screen display will turn
off automatically. To observe the pictures on the unit's display screen again,
power off the unit and power on again, the Component output will reset to LCD.