Memorex MMG-CR3810 Clock Radio User Manual


 
11
OPERATION (CONTINUED)
TO START THE COUNTDOWN TIMER
Once the countdown time has been
entered (see previous page), press
the TIMER button and the display will
start counting down the preset
countdown time.
1
When the countdown timer reaches
“00:00:oo”, the unit will beep. Press
the TIMER button again to turn off the
beeps.
2
NOTES:
During the countdown, if you press the TIMER button again, the countdown
timer will revert back to the original timer.
If no countdown time has been set as shown on the previous page, and the
TIMER button is pressed and released, the unit will turn on and beep.
After the countdown timer has gone off, each subsequent press of the
TIMER button will set the countdown timer for the time as previously set. To
change the countdown timer time to a different time, simply repeat the
instructions on the previous page (“TO SET THE COUNTDOWN TIMER”).
When the countdown timer is counting down, press the DISPLAY button to
cycle from the clock to the timer.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 11