M-Audio AV 30 Portable Speaker User Manual


 
6
|
Studiophile AV 30 User Guide
Appendices
7
Appendix A - Technical Specifications
Type: Two-way desktop reference monitor
LF Driver: 3" diameter, magnetically shielded with high-temperature
voice coil
HF Driver: 3/4" diameter, magnetically shielded silk dome tweeter
Frequency Response: 90 Hz - 20 kHz
Crossover Frequency: 3.3 kHz
RMS SPL: 101.5dB @ 1 meter
S/N Ratio: > 90dB (typical, A-weighted)
Input Connectors: left and right RCA Line input and 1/8" aux input
Polarity: positive signal at “+” input produces outward low-frequency
cone displacement
Dynamic Power: 10 watts continuous, per channel into 4
Input Impedance: 10 k unbalanced, 20 k balanced
Input Sensitivity: 100 mV pink noise input produces 90 dBA output SPL at 1
meter with volume control at maximum
Protection: RF interference, output current limiting, over temperature,
turn on/off transient, subsonic filter
Indicator: Blue power LED ring around volume knob on front panel
Power Requirements: 100-120V/~50/60Hz, 220~240V/~50/60Hz; powered via
detachable 2-conductor line cord
Cabinet: Vinyl-laminated MDF
Dimensions: 7.87" (H) x 5.5" (W) x 6.3" (D)
Weight: 9.5 lbs./4.3 kg
Specifications subject to change without notice