Filter
Top Products
4
|
Studiophile AV 30 User Guide
Acoustic/Traction Pads
In order to minimize vibrations and maximize
physical stability, we recommend you use the
provided acoustic/traction pads on the bottoms
of the Studiophile AV 30 monitors.
Speaker Wire
Connections
1
Use the transparent tinned bare wire cable
included in the Studiophile AV 30 package to
connect the Left and Right speakers via the red
/black spring-clip terminals on the back of each
speaker.
Connecting to a
Computer Sound Card
or Other Audio Output
Device
2
Before connecting the Studiophile AV 30
monitors, make sure the power from the
computer or other output device has been
turned off and the Studiophile AV 30 system is
also turned off.
Connect the RCA input jacks to the
corresponding output connectors of a computer
sound card, portable music player, etc. You
can also use the black 1/8" stereo mini cable to
connect a secondary audio device to the “Aux”
input on the front of the Studiophile AV 30.
Setting the “Bass Boost”
EQ Switch
3
This 2-position switch provides a subtle
increase in bass response. The On mode
increases the low-frequency gain slightly via
the woofer and bass-reflex port. The Off mode
produces a natural, even response for most
listening conditions.
Please see Appendix C for the “Bass Boost”
frequency response curve.
1
2
3