M-Audio AV 30 Portable Speaker User Manual


 
EnglishFrançaisDeutschEspañolItaliano
Studiophile AV 30 User Guide
|
3
6. Stereo Auxiliary Input
and Headphone
Output
For maximum flexibility, we have included a
stereo Aux input which allows you to plug in a
secondary audio source (such as your portable
music player) in addition to the main RCA inputs
in the back. The volume control works on all
inputs simultaneously. Additionally, there is
a stereo headphone output next to the Aux
jack that mutes the sound coming out of the
speakers and redirects it to your headphones.
7. Network & Power
Amplifiers
The power amplifiers and crossover network, for
the Studiophile AV 30 are specially designed for
this woofer and tweeter. The network distributes
low-, mid-, and high-frequency audio signals
to the proper components in order to minimize
distortion and to achieve a balanced sound.
Installation
4
For optimal performance of the Studiophile AV 30, please read the following directions carefully
before installation.
Precautions
Connections: Your Studiophile AV 30 monitors have a variety of inputs for use with a multitude
of devices. Soundcards or other devices with RCA line outputs (e.g., M-Audio Delta Audiophile
24/96) can be connected to the RCA inputs on your left speaker’s back panel. If your soundcard or
portable music player has an 1/8” output, you can connect it to the front panel aux input, using the
provided 1/8” to 1/8” cable.
Correct Power Operation: Since the Studiophile AV 30 contains amplifiers, it must be connected
to a power outlet using the detachable AC cable that is provided. Before connecting power, please
make sure that the On/Off switch on the back of the Studiophile AV 30 is set to the off position.
WARNING! - Use of improper voltage may result in hazardous conditions and/or damage to
speaker components not covered by speaker warranty. Please make sure the voltage is set
appropriately by checking the the position of the red "AC Select" switch on the back before
powering on your speakers.