Filter
Top Products
11
Power shutdown mode
The power circuit in your player is designed
with a power shutdown mode. This is
activated only during battery power
operation of the player when the battery
becomes completely drained. When this
happens:
1 Adjust the POWER switch on the player to
the OFF position.
2 Connect your player to the AC power with
the supplied power adaptor.
3 Let the player stand idle for 30 seconds
before switching on again to resume disc
operation on AC power supply.
Playback time
Times shown are approximate. Actual times
depend on operating conditions.
Safety
•
Do not use in high temperature or near
heat sources.
•
Never connect the positive and negative
poles with metal.
•
Do not open the battery, refer servicing only
to qualified service personnel.
BATTERY DISPOSAL CAUTION:
Batteries contain chemical substances,
so they should be disposed of properly.
Dispose in accordance with
applicable local, state/provincial or
federal regulations.
Using the Battery Pack
Player on, LCD display on 2.5 hr.
Player on, LCD display off 4 hr.
MPD820_17.qxd 4/2/04 9:10 AM Page 11