Filter
Top Products
9
IR Repeater
The audio signal is converted to an infrared light and
transmitted to the headphones (purchased sepa-
rately). Refer to the owner’s manual included with
the headphone on how to adjust the volume to suit
the listener’s taste.
Note 1: Volume level of the IPAD should be set to
100%. If the IPAD level is set at 0% no audio will be
heard through the radio or headphones.
Note 2: For optimal performance a clear line of sight
is required between the docking station’s IR repeater
and the headphones.
Headphone Operation
IR Repeater
HP-400
Headphones
(Purchased
Separately)
Playing Audio Through the Vehicle’s Radio:
1. Press the power button to turn the docking sta-
tion on.
2. Press the IPAD Sleep/Wake button and select a
program that will play audio.
Note: Volume level of the IPAD should be at least
100%. If the IPAD level is set at 0% no audio will be
heard through the radio or headphones.
Docking Station
Power Button
IPAD Wake/Sleep
Button
3. Use the FM transmitter adjustment buttons to
select a frequency not being used by a local radio
station.
4. Tune the vehicle’s radio to the same frequency that
is on the IPAD docking station. The audio from the
IPAD will now be playing through the vehicle’s
audio system. Use the controls on the vehicle’s
radio to adjust the audio output.
Basic Operation and Function (continued)
FM Transmitter Adjustment Buttons
Same Frequency as IPAD Docking Station