Filter
Top Products
Release Button
4
Inserting an IPAD or IPAD 2 into the Overhead Housing
3
4
5
2
1
7
6
9
10
8
3
4
5
2
1
7
6
2. Slide open the docking housing access door.
3
4
5
2
1
7
6
9
10
8
3
4
5
2
1
7
6
3. Next rotate the housing access door until it locks in
the vertical position.
Note 1: Make sure the IPOD dock connector is out
of the way before inserting the IPAD.
Note 2:
• If you are using Original IPAD go to step 4.
• If you are using IPAD 2 please see steps 3a-3c.
3a. Slide the IPAD 2 insert into the housing.
Warning: The IPAD 2 insert should be inserted
with the straight edge on the left and the cut-
outs on the right side (as shown in illustration).
USB
Power
Plug
1. Press the release button on the docking housing.
Gently pull down the housing.
3
4
5
2
1
7
6
9
10
8
3
4
5
2
1
7
6
3
4
5
2
1
7
6
9
10
8
3
4
5
2
1
7
6
3b. Support the right side of the housing with your
hand and slide in insert from the left side.