Filter
Top Products
Before Operation (Continued)
DISC Finalize
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing DISC
MENU or TITLE.
Caution
Once you have finalized a DVD-R disc, you cannot
edit or record anything else on that disc.
However, you can record and edit a DVD-RW disc
by choosing Unfinalize.
11
Follow steps 1-3 as shown on page 24 (DISC
Initialize).
22
Use v / V to select the DISC Finalize option.
33
Press B to move to the third level.
Finalize is highlighted.
44
Press ENTER.
Finalize menu appears.
55
Use b / B to select OK then press ENTER.
The VCR/DVD Recorder starts finalizing the disc.
ote
Finalization can take up to 3-4 minutes depending on
the type of disc, how much is recorded on the disc, and
the number of titles on the disc.
ips
If you load a DVD-RW that has already been finalized
on a different DVD Recorder, you can ‘Unfinalize’ it by
choosing Unfinalize from the Finalize menu. After
doing this, you can edit and re-record onto the disc.
You cannot unfinalize a DVD-R disc.
DISC Protect
When recording in VR mode, set to ON to prevent acci-
dental recording, editing or erasing of the disc loaded. If
you need to unlock the disc to make edits, select OFF.
PBC
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
- ON: Video CDs are played according to the PBC, if
available.
- OFF: Video CDs are played the same way as Audio
CDs.
DVR HOOKUP
25
DISC Initialize
DISC Finalize
DISC Name
DISC Protect
PBC
Unfinalize
Finalize
Prev.
Select
OK
Do you want to finalize the disc?
Finalize
Cancel
DISC Initialize
DISC Finalize
DISC Name
DISC Protect
PBC
ON
OFF
Prev.
Select
DISC Initialize
DISC Finalize
DISC Name
DISC Protect
PBC
ON
OFF
Prev.
Select