Filter
Top Products
6
PROJECTION
PROGRAM MODE
To enter the Program Mode, hold down the “MODE+” button for 2 seconds, until the
time zone (“-5” default) flashes in the lower right. The Program Mode Guide is laid out
in a manner that allows you to program each function separately, or you can follow the
instructions entirely to program the Projection Alarm. Complete programming is usually
done for the initial set-up and will require you to skip step 1 of programming sections III
through VIII. Press the “SNOOZE” button at any time to exit the Program Mode or wait
approximately 15 seconds for the Projection Alarm to automatically return to normal
operation.
A. PROGRAMMING SEQUENCE
1. Time Zone Setting
2. Hour Setting
3. Minute Setting
4. Year Setting
5. Month Setting
6. Day Setting
7. 12/24-hour Mode
8. Daylight Saving Time On/Off
B. FUNCTION BUTTONS
There are 5 function buttons
located on the front of the
Projection Alarm. The function
buttons are labeled: AL, light
intensity icon, light direction icon,
MODE/+, and SNOOZE (the top
bar).
C. TIME ZONE SETTING
1. Hold down the “MODE/+” button for 2 seconds, the time zone (“-5”
default) will flash in the Date LCD.
2. Press the “MODE/+” button to select the appropriate time zone. There are
13 time zones to choose from (based relative to the international time
standard of GMT (“Greenwich Mean Time”).