Filter
Top Products
2. WEATHER ICONS
There are 3 possible weather icons that will be displayed in the FORECAST LCD:
Sunny—indicates that the weather is expected to improve (not that the weather
will be sunny).
Sun with Clouds—indicates that the weather is expected to be fair (not that the
weather will be sunny with clouds).
Clouds with Rain—indicates that the weather is expected to get worse (not that
the weather will be rainy).
The weather icons change when the unit detects a change in air pressure. The
icons change in order, from “sunny” to “partly sunny” to “cloudy” or the reverse. It
will not change from “sunny” directly to “rainy”, although it is possible for the
change to occur quickly. If the symbols do not change then the weather has not
changed, or the change has been slow and gradual.
MOUNTING THE REMOTE TEMPERATURE TRANSMITTER
IV.
A. The Remote Temperature Transmitter can be mounted in two ways: 1)
with the use of screws, or 2) using the adhesive tape.
B. MOUNTING WITH SCREWS
1. Remove the mounting bracket from the Remote Temperature
Transmitter. The bracket should snap off easily.
2. Place the mounting bracket over the desired location. Through the
three screw holes of the bracket, mark the mounting surface with a
pencil.
3. Where marked, start the screw holes into the mounting surface.
4. Screw mounting bracket onto the mounting surface. Ensure that the
screws are flush with the bracket.
5. Snap the Remote Temperature Transmitter onto the mounted bracket.
C. MOUNTING WITH ADHESIVE TAPE
1. With a nonabrasive solution, clean and dry the back of the mounting
bracket and the mounting surface to ensure a secure hold. The
mounting surface should be smooth and flat.
2. Remove the protective strip from one side of the tape. Adhere the tape
to the designated area on the back of the mounting bracket. Remove
the protective strip from the other side of the tape. Position the
Remote Temperature Transmitter in the desired location, ensuring that
the Weather Temperature Station can receive the signal.
13