Filter
Top Products
19
B. Viewing and Operating with Multiple Thermo/hygro
Sensors
1. To view the temperature of a different remote
thermo/hygro sensor press and release the “CH” button.
A shift from one “boxed” number to the next should be
observed in the OUTDOOR LCD.
2. To view the Minimum/Maximum temperature of a
different remote thermo/hygro sensor, first select which
remote thermo/hygro sensor to read data from (indicated
by the “boxed” number), then press and release the
“OUT” button.
3. Pressing and releasing the “OUT” button once will
display the minimum temperature and the date and time
the data was recorded. Pressing and releasing the “OUT”
button a second time (while “MIN” is still displayed,
otherwise press the button twice) will display the
maximum temperature and the date and time the data was
recorded.
4. To reset the Minimum/Maximum readings it is necessary
to select which remote sensor you wish to reset. Press
and hold the “OUT” button for 5 seconds and the records
for the selected remote thermo/hygro sensor will be reset.
MOUNTING