Filter
Top Products
7
batteries. The batteries will fit tightly (to avoid
start-up problems make sure that they do not
spring free during installation).
3. Replace the battery cover.
4. To switch between °F and °C, press the
°F/°C button on the back of the unit.
Note: After the batteries have been installed into
the Weather Temperature Station the LCD
segments should light up. Also within 3 minutes,
the Outdoor Temperature should be displayed in
the OUTDOOR LCD. If any of this does not occur,
remove all batteries and install them again—
carefully observing the polarity.
C. LOW-BATTERY & BATTERY REPLACEMENT
FEATURES
When the batteries become weak in the
Weather Temperature Station, a low battery
indicator (shaped as a battery) appears in the
LCD screen between the Hour display and
the Minute display. When you replace the
batteries in the Weather Temperature
Station, the LCD screen will continue to
display its stored information for 20 seconds.
This means that if you can install the new
batteries within this 20-second time period
you do not need to program the Station
again.