Filter
Top Products
12
location. Through the three screw holes of
the bracket, mark the mounting surface with a
pencil.
3. Where marked, start the screw holes into the
mounting surface.
4. Screw mounting bracket onto the mounting
surface. Ensure that the screws are flush
with the bracket.
5. Snap the Remote Temperature Sensor onto
the mounted bracket.
B. MOUNTING WITH ADHESIVE TAPE
1. With a nonabrasive solution, clean and dry
the back of the mounting bracket and the
mounting surface to ensure a secure hold.
The mounting surface
should be smooth
and
flat.
2. Remove the protective strip from one side of
the tape. Adhere the tape to the designated
area on the back of the mounting bracket.
3. Remove the protective strip from the other
side of the tape. Position the Remote
Temperature Sensor in the desired location,
ensuring that the Weather Temperature
Station can receive the signal.
II. THE WEATHER STATION
The Weather Station can be mounted on the wall