Filter
Top Products
5
lower-central position of the battery cover, then push up and pull out
on the battery cover.
2. Observe the correct polarity and install 2 AA batteries.
3.
Replace the battery cover.
Note:
Immediately after the batteries have been installed, each LCD
(Liquid Crystal Display) will flash and a tone will sound. Within a few
seconds the indoor temperature, indoor relative humidity and the
weather icons (sun and clouds) will be displayed. If not, then remove
batteries for 10 seconds and reinstall. If the outdoor temperature is not
displayed within four minutes, remove batteries from both units, wait 10
seconds and reinstall. The time will show -:-- and start searching for
the signal. If it successfully receives the time signal (usually at night), it
will display the correct time (default is Eastern).
Battery
Cover