Filter
Top Products
17
and hold the OUT button for 5 seconds, the records for the
selected Thermo Hygro Sensor unit will be reset.
MOUNTING
Note:
Before permanently mounting, ensure that the Indoor Temperature
Station is able to receive WWVB signals from the desired location. Also,
extreme and sudden changes in temperature will decrease the accuracy of
the weather station and changes in elevation will result with inaccurate
weather forecasting for the next 12 to 24 hours. These changes will require
a 12 to 24 hour wait before obtaining reliable data. To achieve a true
temperature reading, avoid mounting where direct sunlight can reach the
Thermo Hygro Sensor. We recommend that you mount the Thermo Hygro
Sensor on a North-facing wall. The sending range is 80ft—obstacles such
as walls, concrete and large metal objects can reduce the range. Place
both units in their desired location and wait approximately 10 minutes
before permanently mounting to ensure that there is proper reception. The
Indoor Weather Station should display a temperature in the OUTDOOR
LCD within 4 minutes of setting up.
I. THERMO HYGRO SENSOR
A. MOUNTING WITH THE SCREWS
1. Remove the mounting bracket/receptor from the packaging.
2. Place the mounting bracket over the desired mounting surface.
Through the 2 screw holes of the bracket, mark the mounting surface
with a pencil.
3. Where marked, start the screw holes using the provided screws.
Remove screws from the mounting surface.
4. Align the mounting bracket with the started screw holes.