Filter
Top Products
4
a second per day. These physicists have created an international standard measuring
a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum.
QUICK SET-UP GUIDE
1. Insert two AA batteries into the Thermo Hygro Sensor.
2. Insert two AA batteries into the WEATHER STATION.
3. Wait 5 minutes or until the outdoor temperature and humidity are
displayed in the OUTDOOR LCD (Liquid Crystal Display).
4. Wait 6-10 minutes (in ideal reception conditions) for the WWVB time
to be displayed in the TIME LCD. If the WWVB takes longer to set,
you may manually set the time (see complete instructions). Or you can
wait until after the weather station conducts its programmed search at
the ideal reception time period of 12:00 AM to 6:00 AM.
5. Mount the units ensuring that all units are sending and receiving
signals.
Note:
The Thermo Hygro Sensor transmits a signal every 3 minutes. After
the batteries have been installed, the weather station will search for the
signal for a duration of 5 minutes. If there is no temperature reading in the
OUTDOOR LCD after 5 minutes, make sure the units are within range of
each other or repeat the battery installation procedure.
DETAILED SET-UP GUIDE
I. BATTERY INSTALLATION
A. THERMO HYGRO SENSOR
1. Pull the cylindrical rain cover off the sensor.
2. Remove the battery cover (located on the backside
of the sensor above the mounting post and bracket).
3. Press the arrow and slide the battery cover off.
4. Observing the correct polarity install 2 AA
batteries.
5. Replace battery cover and place rain cover
snugly onto the sensor.
B. WEATHER STATION
1. Remove the battery cover. To do this, insert
a solid object in the space provided at the