Filter
Top Products
Operating Instructions
|
GB
. Cleaning
Only use a slightly moist cloth to clean the case surface of the
set. Ensure when cleaning that no moisture enters the set.
The inside of the CD compartment must only be cleaned
with a clean, dry brush (e.g. lens brush available from pho-
tographic dealers). NEVER moist clean the inside of the CD
compartment!
Warning!
Moisture penetrating the set can give rise to
the danger of an electric shock!
Only clean the laser scanning lens inside the CD compart-
ment (if necessary) with a clean, dry brush. NEVER touch the
laser scanning lens with bare hands!
Please note!
Only clean the laser scanning lens inside the CD compart-
ment (if necessary) with a clean, dry brush. NEVER touch
the laser scanning lens with bare hands!
. Functional faults
Proceed in the following manner in the event of functional
faults of the set …
• First disconnect the plug from the mains socket or remove
the batteries from the battery compartment.
• Check that there is at least 10 cm space above, behind and
on either side of the set in relation to walls or objects.
If this is not the case, then switch o the set and allow it
to cool down for at least one hour! Relocate the set in
such a manner that the above minimum distances are
observed.
• If audio CD playback is faulty or does not function at
all, then this can indicate that a lm of condensation has
formed on the laser scanning lens in the CD compart-
ment.
This can happen if the set has been exposed to wide tem-
perature uctuations.
In this event place the set in a dry environment with a
normal room temperature and wait at least ve hours
before switching on the set again.
Manual_KH2242_EN 16.09.2003, 15:04 Uhr15