Kenwood DPC-X637 Portable CD Player User Manual


 
29
DEUTSCH
ITALIANO
ESPAÑOL
Programming tracks in desired order
Favorite tracks (max. 25 tracks) can be programmed.
Press during stop status.
1 Perform the steps in "Selecting Play Mode" (page 28) to select PGM "
2
", and then press the
MENU key.
2 Press the 4 or 3/¢ key to select a desired track number.
3 Press the REPEAT key to program the selected track.
÷ Repeat steps 2 and 3 and enter the Track numbers into the program in order.
÷ The selected track is added to the end of the program.
÷ To check the programmed tracks, press the REPEAT key. Each press of the key displays the next track in the
program.
4 Press the MENU key
5 Press the 3/¢ key to start the program playback.
÷ Each press of the 7 key deletes the last track from the program.
÷ Up to 25 tracks can be programmed in this unit, but not more than 25 tracks.
÷ Program playback can be repeated by combining repeated playback (page 20) with it.
÷ To exit from the program play mode, stop program playback, perform the steps in "Selecting Play Mode" (page 28)
and select normal play mode.
Continued on next page
\
*5378_25_38EN 03.7.3, 2:19 PM29