Kenwood DPC-X637 Portable CD Player User Manual


 
13
DEUTSCH
ITALIANO
ESPAÑOL
÷ Recharging is not possible during playback. Be
sure to switch the power OFF before starting re-
charging.
÷ Be sure to close the top cover of the unit before
proceeding to recharging.(Close securely by
pushing the front right position of the top cover
unit it clicks.)
Place the main unit on
the recharger stand by
aligning the triangular
markings on them.
2
Charging the rechargeable batteries.
÷ The CHARGE indicator lights when charging starts and
goes off when it completes.
DPC-X937: Recharging completes in about 2.5 hours.
DPC-X637: Recharging completes in about 6 hours.
÷ If charging doesn't start, wait for at least 3 seconds before
placing the main unit again.
÷ After the batteries have been charged, remove the AC
adapter. Disconnect the AC adapter from the wall outlet
when the recharger stand is not used.
÷ When using a rechargeable battery which is new or which
has not been used for more than 2 months, the operating
period may be shorter than nomal. This is due to the prop-
erties of the battery and not a malfunction. After recharg-
ing, use the battery on the unit until it is exhausted. The
original performance of the battery performance can be
recovered by repeating this cycle a few times.
÷ Rechargeable batteries can be recharged. When the
playable time per recharge reduces, please newly pur-
chase the optional (NB-3A70) rechargeable batteries.
Charging in progress
Goes off
Lights up
Charging completed
÷ The unit can be operated while it is placed on the
recharger stand during as well as after charging.
For the U.S.A.
*5378_08_15EN 03.7.3, 3:13 PM13