Filter
Top Products
TYPICAL INSTALLATIONS / TOOLS AND MATERIALS NEEDED
INSTALLATION ON COPPER PLUMBING USING COMPRESSION FITTINGS
apply several
wraps of
Teflon tape
FILTERED
WATER
optional shutoff valve
brass
ferrule
compression
adaptor
nut
WATER
IN
INLET
3/4" NPT
Note: Be sure to allow a minimum space of 1-1/2"
under the filter for removing the sump, to change
the cartridge.
- MATERIALS AND TOOLS NEEDED -
I_ 2 compression adaptors, 3/4" NPT x comp.
(compression end to fit existing copper pipe)
I_ Teflon tape
I_ tubing cutter
I_ sandpaper or emery-cloth
I_ 2 wrenches, either open end or adjustable
jaw, size to fit compression adaptors
SOLDERED COPPER INSTALLATION
(OBSERVE FIG. 1 NOTES)
WATER
IN i/}J
optional shutoff valve 3/4" copper
pipe, as req'd.
- MATERIALS AND TOOLS NEEDED -
(see page 5)
adaptor,
....... 3/4" NPT x sweat
(apply several wraps of
Teflon tape to threads)
THREADED INSTALLATION
(OBSERVE FIG. 1 NOTES)
3/4" nipple
optional shutoff valve
- MATERIALS AND TOOLS NEEDED -
(see page 6)
3/4" hex nipple (2)
union fitting (2) /
3/4" pipe, as required