Filter
Top Products
TABLE OF CONTENTS
Planning Installation ............................................. 3- 4
Typical Installation Drawings / Tools and Materials Needed .......... 4
Water Filter Housing Installation .................................. 5- 7
Filtering All House Water ...................................... 5 - 6
Using Compression Fittings .................................. 5
Using Soldered Copper ...................................... 5
Using Threaded Fittings ..................................... 6
Filtering Water To One Faucet (Installing Under Sink) ............. 7
Installing Filter Cartridge ...................................... 7
Filter Cartridge Life / Replacement ................................ 8 - 9
Repair Parts .................................................... 11
PLANNING YOUR INSTALLATION
When planning your installation, first read the filter
cartridge information on page 8, and decide where
to locate the water filter housing. Then use the draw-
ings on page 4 to guide you. There are many vari-
ables to consider as you plan. Some of these are:
_" the water filter housing inlet and outlet internal
threads are 3/4" NPT.
_-" existing plumbing type (copper, threaded, etc.)
and nominal size (1/2", 3/4" etc.)
_-" tools you have and your plumbing skills
_" cost of materials needed
_" space available for installing the filter housing
Make a simple sketch of your proposed installation
and a list of plumbing materials you will need. Ob-
tain everything you need before starting the installa-
tion. Be sure you have the tools required.