Filter
Top Products
5
English
Connecting the AC Power Cord
Firmly insert the supplied AC power cord into the AC inlet on the back of the Unit.
CAUTIONS:
• ONLY USE JVC POWER CORD PROVIDED WITH THIS SYSTEM TO AVOID MALFUNCTION OR DAMAGE
TO THE SYSTEM.
• BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN YOU ARE GOING OUT OR WHEN
THE SYSTEM IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
Now you can plug the AC power cord into the wall outlet, and your System is at your command!
COMPU PLAY
The JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment at a single press of the play button
for that function. One Touch Operation turns the power on for you, then starts the function you have specified.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
AUTOMATIC POWER ON
The System automatically turns on with the following operation.
• When you press the CD OPEN/CLOSE 0 button on the Unit (or CD 0 button on the Remote Control), the System automatically turns
on and the CD cover opens to allow CD insertion. However, this operation does not change the source to CD.
When you press the
button to turn on or off the System, the CD cover will automatically close if it is open.
Removing the speaker grilles
• The speaker grilles can be removed.
• When removing,
1. Insert your fingers at the top and pull toward you.
2. Pull the bottom toward you as well.
On the Unit
CD #/8 button
FM/AM button
TAPE @ # button
MD/AUX button
On the Remote Control
CD #8 button
TUNER BAND button
TAPE @ # button
MD/AUX button
AC IN
AC power cord
Attaching the speaker grille
Match the fittings when attaching the grille.
Speaker grille
EN01-11.UX-V30R/V330R[E] 00.1.20, 5:41 PM5