JVC RD-T5BU Portable CD Player User Manual


 
3
RD-T7GN/RD-T5BU(US) / LVT0737-003A / English
English
The Remote Control makes it easy to use many of the functions of the Unit from a distance of up to 7m (23 feet) away.
You need to point the Remote Control at the remote sensor on the Unit’s front panel.
Note: If you point the Remote Control from the slant direction, the above distance will be shortened.
Firmly insert the AC power cord supplied with the System into the AC inlet on the back of the Unit.
CAUTIONS:
ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM IN
ORDER TO AVOID MALFUNCTION OR DAMAGE TO THE SYSTEM.
BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN
GOING OUT OR WHEN THE SYSTEM IS NOT IN USE FOR AN EXTEND-
ED PERIOD OF TIME.
Plug the AC power cord into the wall outlet, and your System is at your command!
Common Operations
Turning the Unit On ————————
Press the button.
The STANDBY indicator goes out, and the display comes on, and
“WELCOME” is displayed.
The Unit comes on ready to continue in the mode it was in when the
power was last turned off.
For example, if the last thing you were doing was listening to a
CD, you are now ready to listen to a CD again. If you wish, you
can change to another source.
If you were listening to the Tuner last, the Tuner comes on play-
ing the station it was last set to.
Note: When power is supplied from the batteries, the button
on the Remote Control does not work.
Turning the Unit Standby ——————
Press the button again.
When operating on AC power:
“GOOD BYE” is displayed and the display becomes blank, except
for the clock display. The STANDBY indicator lights up.
When in Standby mode, the Unit continues to a small amount of
power to run the display.
To switch off the Unit completely, unplug the AC power cord
from the AC outlet.
When power is supplied from the batteries:
When the Unit is turned off with the button on the Unit (the
button on the Remote Control is ineffective), the Standby in-
dicator lights up and the display is blank.
To switch off the Unit completely, remove the batteries from the
Unit.
Using the Remote Control [RD-T7GN Only]
Remote sensor
Connecting the AC Power Cord
AC IN
REMOTE CONTROL RM-SRDT7
VOLUME
BASS/TREBLE
BAND
FM MODE
TUNER
CD
SLEEP
AHB PRO
REPEAT
456
123
10 +10
789
STANDBY/ON
SNOOZE
/DIMMER
P.TUNING
TUNER BANDCD
RANDOM/
REPEAT
BASS/
TREBLE
MULTIJOG
VOLUME
AHB PRO
SNOOZE/DIMMER
CD/TUNER ALARM
TIMER
SLEEP
CLOCK/
DISPLAY
STANDBY
STANDBY/ON
CD PORTABLE SYSTEM
BASS/TREBLE
AHB PRO
PHONES
VOLUME +, –
STANDBY/ON
STANDBY indicator
CLOCK/DISPLAY
AHB PRO
[RD-T7GN Only]
VOLUME control
(Jog dial)
[RD-T7GN Only]
BASS/TREBLE
Display
SNOOZE/DIMMER
[RD-T7GN]
SNOOZE
[RD-T5BU]
STANDBY/ON
Turning the Power On and
Standby
STANDBY/ON
or
STANDBY/ON
STANDBY
STANDBY/ON
or
STANDBY/ON
STANDBY
RD-T5BU&T7GN(US)eng.fm Page 3 Wednesday, July 4, 2001 4:02 PM