JVC NXPN10 MP3 Docking Station User Manual


 
16
NOTES:
• JVC is not responsible for any loss of or damage to iPod that might result from the use of
this product.
Do not touch or hit the terminals of the dock and of iPod. It might cause damage to these terminals.
When you connect iPod to the dock, make sure the terminal on the dock is fully inserted into iPod.
• Always set the volume to the minimum level when connecting or disconnecting iPod.
Do not carry the unit with iPod connected. You might drop it down or it might cause damage to
the connector part.
Sound distortion may occur when playing back audio sources with a high recording level. When
distortion occurs, it is recommended to turn off the equalizer of iPod. For information on operating
iPod, see the instruction manual for iPod.
Turn off the unit when disconnecting iPod.
Remove iPod from the dock when you do not use it.
When you cannot operate iPod connected through the unit or using the remote control, operate
iPod itself.
After connecting iPod, wait until the unit is ready for operation (about 3 seconds).
NX-PN10[C].BOOK Page 16 Friday, May 21, 2010 11:24 AM