Filter
Top Products
9
5
Slide the locking knob
into lock position
on the back of the cradle.
6
Press the (POWER) button to turn on your
JVC PnP.
• If your JVC PnP has been properly connected
and the antenna is receiving the SIRIUS signal,
you will hear audio.
• If your JVC PnP has not been properly
connected, “Antenna Error” will appear on the
display of your JVC PnP.
Re-orient the antenna until you hear audio (see
“8 Antenna Aiming” on page 27).
– Make sure your car is not in garage, or
somewhere the satellite signal could be
blocked.
Running the Antenna Cable
Before routing the antenna cable, confirm that the
antenna is mounted in a good location.
1
Press the (POWER) button to turn off your
JVC PnP.
2
Slide the locking knob
into unlock position.
3
Remove your JVC PnP from the cradle.
4
Unplug the cigarette lighter adapter from the
cigarette lighter and the antenna from the
cradle.
To be continued...
KT-SR2000_02-14.p65 04.7.14, 16:079