Filter
Top Products
8
Finding the Best Antenna Mounting
Location
1
Temporarily plug the antenna into the back of
the cradle—ANT. until it is firmly seated.
2
Find an antenna location on a metal surface of
your car—at least 30 cm × 30 cm (12 inches ×
12 inches), and at least 15 cm (6 inches) from a
window.
• The antenna’s powerful magnet will secure it to
the metal surface.
• Best reception is achieved with the antenna
mounted on the roof or trunk for convertibles.
• If your car has a roof rack or skid ribs, it may be
necessary to mount the antenna off-center.
3
Temporarily plug the cigarette lighter adapter
into the cigarette lighter.
4
Slide JVC PnP all the way into the cradle so
that the connector at the bottom of the unit
makes proper contact in the cradle.
3
Plug the cigarette lighter adapter into the back
of the cradle—DC 12 V.
4
Activate the FM signal transmitter and preset the
frequency
(see “4 FM Transmitter Options” on
page 24).
• It is recommended to preset the same frequency
into your car stereo as you have selected so you
can easily tune in to the frequency.
Installation in Your Car with KS-K6012 (continued)
Note: You can also connect a cassette adapter or
an audio cord (both not supplied) to the AUDIO
jack to send the signals to your car stereo.
An optional hard-wired FM transmitter—FM
Switching Box Assembly (Parts No. 112C3159) is
available. By connecting this Assembly between
the FM OUT terminal of the cradle and the
antenna input terminal of your car stereo, you can
obtain stable and reliable transmission/reception.
KT-SR2000_02-14.p65 04.7.14, 16:078