Filter
Top Products
JL AUDIO ZR650-CSi 3
ZR650-CSi SPECIFICATIONS:
Woofers: Mineral-filled polypropylene cone body,
1-inch (25mm) voice coil, low-profile/ symmetrical-
roll spider, butyl rubber surround
Tweeters: 1-inch (25 mm) aluminum dome
tweeter with soft rubber suspension, neodymium
magnet, ferrofluid cooled and damped, variable
mounting system
Crossover Networks: 2-way network with 1st order
low-pass and 2nd order high-pass circuit, premium
polypropylene film capacitors, air-core inductors and
non-inductive Mills™ resistors, 5-position adjustable
tweeter output level, 4-position midrange presence
control, Polyswitch tweeter protection
Continuous Power Handling: 85 Watts (RMS Method)
Peak Music Power: 255 Watts
Recommended Power Range: 25-175 Watts (RMS)
Frequency Response: 48 Hz - 25 KHz (± 3 dB)
Efficiency @ 1W/1m: 89.5 dB
Nominal Impedance: 4 ohms
Included Components and Parts:
• Two ZR650-CWi 6.50-inch (160 mm) Woofers
• Two ZR100-CT 1-inch (25 mm) Tweeters
• Two ZR650/570-CSpxo Crossover Networks
• Two Compact Flush-Mount Tweeter Fixtures
• Two Enhanced Flush-Mount Tweeter Fixtures
• Two Surface-Mount Tweeter Fixtures
• Two Metal Woofer Grilles with ABS Grille Trays
• Two Self-Adhesive ZR Nameplates for Grilles
• Butyl Adhesive Putty for Woofer Grilles
• Twelve #8 x 1.25 inch (30 mm) Sheet Metal Screws
• Four #6 x 1-inch (25 mm) Sheet Metal Screws
• Two 1.18-inch (30 mm) Machine Screws
• Two Metal Spring Clips for Tweeter Fixtures
• Eight Mounting Clips for Woofer Mounting
• Two 6.4 mm Female Crimpable Connectors
• Two 4.7 mm Female Crimpable Connectors
• Four 2.8 mm Male Crimpable Connectors
• Twelve Crimpable Spade Connectors
All specifications are subject to change without notice.