Jensen KT2054 Clock Radio User Manual


 
SNOOZE FUNCTION
1. When your alarm (buzzer or radio) sounds, you can press the
Snooze Button (#3) to extend the alarm time by 9 minutes. The
buzzer or radio will then turn on again once the 9 minutes expires.
2. This can be repeated until the ON/AUTO/OFF Switch (#6) is moved
to the "OFF" position.
SLEEP TIMER OPERATION
1. This clock radio is equipped with a “sleep timer” function that will
switch off the radio automatically after a selected period anywhere
from 1 minute up to 1 hour and 59 minutes.
2. Press the Sleep Button (#9), and then rotate the Rotary Set Dial (#8)
clockwise to extend the operation period between 1 minute and 59
minutes or rotate it counterclockwise to set the sleep time in the
range of 1 hour 59 minute).
3. After the selected sleep time has elapsed, the radio will automatically
turn off.
4. To turn the unit off before the sleep time expires, press the Snooze
Button (#3).
SLEEP AND WAKE TO RADIO
1. Set the desired alarm time as described in the section “SETTING
THE ALARM TIME”.
2. Tune the radio to your desired channel.
3. Set your desired sound volume and sleep time as described in the
above section.
4. Switch the ON/AUTO/OFF Switch (#6) to “AUTO” position. The AUTO
Indicator (#20) will light.
5. The radio will switch off after the sleep time has elapsed and on after
the alarm time reaches.
CARE AND MAINTENANCE
1. Clean the unit with a soft, damp (never wet) cloth. Solvent or
detergent should never be used.
2. Avoid operating your unit under direct sunlight or in hot, humid or
dusty places to reduce the risk of fire or electric shock.
3. Keep your unit away from heating appliances and sources of
electrical noise such as fluorescent lamps or motors.
4. For better Clock Display clarity, avoid operating the unit under direct
sunlight or in strong room illumination.
5. Unplug the unit from the electrical power outlet immediately in case
of malfunction.
P7