Jensen JiMS-198i MP3 Docking Station User Manual


 
16
The Sleep Timer allows you to set the unit automatically power off after a selected sleep
time duration is set. Sleep time function can be set from 1 minute to 120 minutes.
1. In unit power ON mode, press the SLEEP button to enter SLEEP setting. LED flashing
and showing “90”. Press the SLEEP button repeatedly, it shows 90-60-30-15-OFF
(display showing normal clock) for selection.
2. Press the UP / DOWN buttons to select exact minutes you desired.
3. Wait for 3 seconds to confirm, sleep time will stop flashing and return to normal clock
display. If sleep set successful, unit will automatically turns to standby mode when
pre-set sleep timer expired.
4. Press the sleep button once to check remained sleep time if necessary during sleep
timer count down.
5. To switch off the unit before the selected sleep time, press the power ON/OFF button
once.
Note :
If you are falling asleep to music from an external device connected to the AUX input,
the sleep timer will shut off the power to this system but it will not turn off the external
device.
Press the DIMMER button to adjust the LED display Hi / Lo brightness. The brightness
default setting is Hi.
This unit provides an auxiliary audio signal input jack for connecting external audio
devices like MP3 players, CD players and older, non-dockable iPods and listen to your
external source through the speakers of this system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.
2. Plug one end into the Aux-in jack on the main unit and the other end of the cable into the
Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the external audio device.
4. To select auxiliary audio input, press the FUNCTION button to select Aux In mode. LED
display will show “AuH
5. The volume level can now be controlled through the main unit. Operate all other
functions on the auxiliary device as usual.
SLEEP TIEMR OPERATION
BACKLIGHT BRIGHTNESS OPERATION
AUXILIARY INPUT