Filter
Top Products
DOCK ADAPTOR FOR iPod
20GB - 30GB iPod / iPod video adaptor
80GB iPod classic adaptor
iPod nano adaptor
iPod touch adaptor
POWER SOURCES
BASIC OPERATION
Turn on the unit by pressing the Power ON/OFF button either on the main unit or on the
remote control.
Function modes (iPod/AUX/radio) can be changed by pressing the Function button on either the
main unit or on the remote control.
The volume of the unit can be controlled by pressing the volume buttons on the main unit or on
the remote.
GETTING STARTED
5
This unit operates on 4 X ‘AA’ (UM-3) batteries (not included) or external AC adaptor rated at
DC7.5V, 1500mA (included). There is also a DC3V lithium battery, type CR2032 for clock and radio
preset backing during main power outage.
•
1.
2.
•
1.
2.
3.
•
1.
2.
After powering up the unit, a clock display will appear in the unit’s LCD panel. Then initalize the unit
by pressing the Reset button adjacent to the Backup Battery Compartment before setting up the
clock.
Backup Battery
Be sure to remove the battery insulator tab on first use.
Please change to a fresh battery every 12 months to ensure proper backup function.
Battery Operation
Open the Main Battery Compartment door.
Following the polarity diagram as shown in the battery compartment, insert 4 X ‘AA’ (UM-3)
alkaline batteries. Then close the battery door.
Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
AC Adaptor Operation
When the AC adaptor is connected to the DC jack,
the batteries are automatically disconnected.
Plug the AC adaptor into a AC120V 60Hz power
outlet. Be sure to use the included AC adaptor or one with a correct ratings and polarity.